Having
built many cases for myself, VL and friends, I have had the opportunity
to see many case styles and personalities. I have pieced together
system for a couple of friends using the Cooler Master Praetorian
Case before and although I would not claim it to be a LAN party
show case with flairs and what not, it had always been one that
caught my eye.
When
I got the call to look over and review the latest in the Praetorian
lineup from Cooler Master, I was, well, giddy to be honest. It's
not often that we get to play with the toy's we have been dreaming
about. There was however two distinct problems with getting a
case I had envied of my friends. Number one of course is that
this is a review, and I must stay unbiased throughout the process
to give you, my readers, a straight look at Cooler
Master's Praetorian 730. Number 2, the Praetorian 730 is completely
redesigned from the one's I enjoyed installing previously; will
the redesign live up to my former expectations and lust?
Before
we can delve deeper and determine what is what, let’s look
at what the Cooler Master Praetorian 730 has to offer out of the
box.
Specifications
Size:
ATX Mid Tower
Construction: 2mm Aluminum
Drive Bays: Four 5.25” (Exposed)
Two 3.5” (Exposed)
Four 3.5” (Hidden)
Power Supply: Not Included
Available Colors: Silver / Anodized Black
Fan Configuration: One 120mm Front intake / Two 80mm Rear outtake.
Front I/O Interface: USB 2.0/1.1 x 2 / IEEE 1394 / R-L Audio
Miscellaneous: Thermally advantaged management / Removable motherboard
tray
The
Cooler Master Praetorian 730 is an elegant design, from the front,
top and sides you can see that the flow is well thought out. The
front of the case appears as though it was designed by Onkyo or
Carver with stereo like lines and doors. Simple things such as
the front door closure having rubber seats to make sure it closes
softly and without sound. I received the silver variant of the
Praetorian 730, once again along the audiophile theme, the silver
is brushed aluminum. Overall, while not being the most extreme
case I have reviewed, this has to be one of the overall sexiest
cases I have worked with.
Starting
at the front you can see a swinging front door with the familiar
“Cooler Master” logo, I am not a huge fan of swinging
doors on my cases (it gets bothersome when inserting CD's, powering
on/off etc), however I understand it has become the norm for
many; this is a deviance from the original Praetorian cases
I had worked on as they had no front door. The front door has
grown in popularity and the reasoning is two fold; no longer
are we required to purchase Black or paint our Tan covered CD
/ Floppy units as our door will cover those nicely for us. There
is also the ability to dress the front panel up with varying
designs and lights. While the 730 covers up the drives behind
it, the cover is not directly flashy with lights. There is a
simple yet aesthetic design, with some of the 120mm front fan
blue light spilling out onto it.
A
variation to the “standard” once you open the door,
there are four 5.25” bays and two 3.5” bays. The
power and USB / FireWire / Audio ports are positioned on the
top of the case, alleviating at least a couple of scenarios
when you would need to open the swing door. As mentioned earlier,
there are four small rubber feet on the door to ensure when
closing it there is a soft seal affect. The Black mesh grill
you are met with is consistent throughout the front, even the
edging is trimmed in this black mesh. The “Praetorian”
badge is placed in the center of the 120mm front intake fan,
where the black mesh grill doubles as a filter. Looking over
the door itself, you can see the 2mm thick aluminum, although
you can feel the weight the door swings freely on its pivot.
The
top of the 730 case sports the power/reset buttons, power and
hard drive lights, a flip door concealing the USB/FireWire and
Audio ports. What is catching to my eye is the simple design around
the power/reset button and lights as well as the stud filled mounting
holes for the flip door. Once again I was asking myself if Onkyo
had a hand in the design of this case.
The
left side of the Praetorian 730 is not a window panel by default,
although it does appear this can be ordered. There is however
a blow hole for directing outside air to your CPU intake fan,
once again a simple and aesthetic design.
Removal
of the side panel is easily accomplished by removing the two
thumbscrews on the rear flap. The thumbscrews are of sufficient
diameter that you can actually grip them and torque them. The
panel itself is easily removed and installed without having
to slide it with an exact amount of pressure to finish the job.
There is also a beveled out section on the rear of the panel
to assist you in sliding the panel rearward.
Now
that the side panel is off, I can look closer at the internals
of the Praetorian 730. Something shows up that is not on my favorites
list as far as case attributes. The drives are all mounted to
the actual case; there are no mounting rails that slide in or
snap-on clamps that mount the drives. Its good old fashioned remove
both side panels, slide the drive in on a small edge shelf and
screw it down to the actual drive riser. This is however supposed
to be one of Cooler Masters cheaper cases so we won't knock that
too much.
In
today's day and age, this actually surprised me, why would you
build a case as forward thinking and simple oriented as the
Praetorian 730, then do something as old school as mounting
the drives TO the case?
