V I P E R L A I R .com - How to setup Internet Connection Sharing, Page 2/3

	Home
	Reviews
	Articles
	Forums
	Links
	Advertising
	Contact
	Archives
	Newsletter

	ABIT RX600 Pro-Guru PCIe
	Albatron Trinity 6600GT PCIe
	HIS X700PRo IceQ Turbo VIVO
	VIA PT Chipset Series Overview
	Swiftech H20-120 Rev. 3 Liquid Kit
	Chenbro Gaming Bomb II Case
	ASUS Star Ice Air Cooler
	nForce Professional Tech Overview
	ATI Radeon X600 XT PCIe
	Interview With Intel

Search for lowest prices:

for

Price Search: for

How to setup Internet Connection Sharing: Rather than dishing out money for routers, there are some built in tools to share your Internet connection within Windows.

Date:	December 1, 2002
Manufacturer:	N/A
Written By:

Windows 2000 ICS Setup - Bridged DSL or Cable Modem

This part is how you get Windows 2000 to use Internet Connection sharing when you have a Bridged DSL or Cable Modem connection with a NIC going to a hub (or a crossover cable to the other computer) and then having the secondary computer plugged into the hub also.

1. First off, right click on the "My Network Places" icon on your desktop. You will then select "Properties" from the drop down menu. That will open up this window for you:

Now, in this window you should see an icon for "Local Area Connection" and also "Local Area Connection 2", once for each NIC you have installed in your computer.

2. Next, you will want to right click on the Local Area Connection Icon (or whichever is the NIC that goes to your cable/DSL modem), and once again select "Properties" from the drop down window. That will open up a window that looks like this:

3. Now, you should notice at the top of the window there are 2tabs. The tab furthest to your right is the "Sharing" tab. That is where we will want to go next. Click on the Sharing Tab and it brings you to this part of the window:

4. As you can see, the box next to "Enable Internet Connection Sharing for this connection" is not checked, thus ICS is not setup to work right now. To share this connection through ICS, simply check that box, and then click "OK". It will bring up a window like this where you will have to click yes or no:

Now this little popup is basically telling you that it will statically assign the IP address of 192.168.0.1 to your other NIC so that it can act as the gateway for all other computers on your network. You are going to want to click "Yes" here to go ahead with sharing ICS. (A word of note here, you might want to check and make sure you don't already have an IP address configured into your other NIC so that everything will flow smoothly during this).

5. Double check the properties for your NIC to ensure that they are setup correctly to use ICS. At the "My Network Places" Window, Right click on your Local Area Connection 2 Icon and select Properties from the drop down menu. This will bring up a window that looks like this:

Now, to check the TCP/IP settings, Simply double click on the "Internet Protocol (TCP/IP)" line, or highlight it and then click the "Properties" button beneath it. This will bring you to this window:

Your TCP/IP Properties should look exactly like this as well. If they do not, then there is a problem somewhere.

Now, to get your Client computers up and working, here is how you do it. Go to a command prompt, if you're using wIndows 2000 or Windows NT, type "ipconfig" at the prompt. It should display something like this:

Now, at the prompt type "ipconfig /renew" and it should renew the Adapter to try and obtain an IP address from the DHCP server that is running on your host computer. You should get something like this:

Not everyone uses Windows 2000, so let's move on to setting this up in Windows XP...

NEXT